====== ReadLightSensor ======
The **ReadLightSensor** function reads the intensity of the light currently being 'seen' by the NXT light sensor.
The **input** parameter should be an NXT input port number between 1 and 4 (which the light sensor is plugged into).
The **active** parameter should be set to **true** if you want the white light to be turned on during sensing and **false** if the light is not required.
The returned value will be a light level value between 0 and 100.
level = nxt.ReadLightSensor( input, active );
====Example - Sense light level on port 3====
function OnStart()
{
nxt = app.CreateNxt();
app.SetMenu( "Connect,Light Level" );
}
function OnMenu( name )
{
if( name=="Connect" )
nxt.ShowDevices();
else if( name=="Light Level" )
{
level = nxt.ReadLightSensor( 3, false );
app.ShowPopup( level );
}
}